linkedin
  • Become a Seller

Fusion 360 Questions & Answers

View Product | Have a Question?

Showing 1- 10 of 144 questions

img
Editor's ChoiceMost Popular
Q:

How to make a pencil using Fusion 360?

Mohd Fazil . Mar 23, 2024 A:

To make the pencil using Fusion 360, follow the steps given below:

  • Tap on Create and then choose Create Sketch
  • Tap on the square box at the top right corner and select the Top View
  • Go to Shapes > Polygon > Inscribe Polygon
  • Create a hexagon of 30mm
  • Tap at the center of the polygon and then create a circle of 60mm
  • Now Extrude your drawing by pressing ‘E’
  • Tilt the circle by holding the Arrow Key and then extending it to make a cylindrical shape
  • Set the length of the cylinder to 490mm
  • Set the perspective to ‘Back’ and then create a new sketch
  • Zoom in at the top of the cylinder and then press ‘P’ in order to project the new sheet and the cylinder
  • Press L and then make a triangle at the top the cylinder
  • Make a line at the tip of the triangle to show the led portion
  • Make 6 lines that stretches from the bottom of the polygon to the circular ending to the cylinder.

Sachin Singh . Mar 23, 2024
Q:

Why does the message 'Manage extension properties are being prepared for this item' appear when I try to release a part of an assembly in Fusion 360 Manage, and why does it take so long?

ishan . Dec 19, 2023 A:

The message Manage extension properties are being prepared for this item indicates that the system is processing additional properties or attributes associated with the item during the release process. The delay may occur due to complex calculations or data transformations required for these properties.

Nitin . Sep 23, 2023
Q:

Why can I not access the 'Administration' tools under the Manage profile, even though I am the administrator for our company's Fusion 360 and Manage products?

Abhishek Gupta . Oct 08, 2023 A:

If you are unable to access the 'Administration' tools under the Manage profile, despite being the administrator for your company's Fusion 360 and Manage products, it could be related to user permissions or roles. Check your user account settings and ensure that you have the necessary administrative privileges assigned.

Satinder singh . Oct 08, 2023
Q:

Is there a way to track link clicks in Fusion Team?

Anand kumar . Oct 07, 2023 A:

Fusion Team does not natively track link clicks. You may need to use third-party tools or analytics services to monitor link clicks in shared documents.

BHARAT MITTAL . Oct 07, 2023
Q:

Why can't I use my cloud credits for shape optimization, even though I have a Fusion 360 educational license with unlimited cloud credits?

Parag somani . Oct 07, 2023 A:

Fusion 360 educational licenses may have restrictions on certain cloud services. To avoid this, make sure that your license specifically covers shape optimization or contact Autodesk support for clarification.

BHARAT MITTAL . Oct 07, 2023
Q:

How can I ensure that the part numbers used in the drawing BOM table match the item numbers assigned to released parts in Manage?

Anand kumar . Oct 07, 2023 A:

To ensure that part numbers used in the drawing BOM table match the item numbers assigned to released parts in Manage, you should maintain consistency between the two sets of data and update them accordingly when changes are made.

TRIDIB KUMAR GURIA . Oct 07, 2023
Q:

Could the ongoing Fusion 360 outages be preventing me from running workflows in Fusion 360 Manage?

naresh mittal . Oct 07, 2023 A:

Ongoing Fusion 360 outages can indeed prevent you from running workflows in Fusion 360 Manage. It's essential to monitor Autodesk's service status and report any issues you encounter to their support team.

sorabh ncmcnm . Oct 07, 2023
Q:

Why does Fusion Lifecycle not automatically map the Quantity and Ref Des fields when importing a BOM, even if the fields have the same names in the Excel file?

Divya Jyothi . Oct 06, 2023 A:

Fusion Lifecycle may not automatically map the Quantity and Ref Des (Reference Designator) fields when importing a BOM if the field names in the Excel file do not exactly match the corresponding fields in Fusion Lifecycle. Make sure that the Excel column headers match the field names in Fusion Lifecycle for successful mapping during import.

Anupam shah . Oct 06, 2023
Q:

Why is Fusion 360 opening a drawing in two tabs when I open an already finished drawing?

Deepika Sirohi . Oct 06, 2023 A:

If Fusion 360 is opening a drawing in two tabs, it may be due to a software issue or configuration setting. Check your Fusion 360 settings, especially those related to how drawings are opened, and ensure that there are no conflicts or errors in your workspace.

Harsha rajpal . Oct 06, 2023
Q:

Why is the Manage extension in Fusion 360 taking a long time to generate item numbers for drawings?

Dheeraj Aggarwal . Oct 06, 2023 A:

If the Manage extension in Fusion 360 is taking a long time to generate item numbers for drawings, you should check the server performance, network connectivity, and server load. Slow item number generation can be influenced by various factors, including system resources.

Nishant Goyal . Oct 06, 2023

How was your experience with this product?

  • img
  • img
  • img
  • img
  • img
img

150+ experts available

Get Free Advice to any Individual or Business Related Queries.

Get Expert Advice

Got any questions?

Ask Question from Real Users or Software Experts

Ask Question

Still got Questions on your mind?

Get answered by real users or software experts

Disclaimer

Techjockey’s software industry experts offer advice for educational and informational purposes only. A category or product query or issue posted, created, or compiled by Techjockey is not meant to replace your independent judgment.

Software icon representing 20,000+ Software Listed 20,000+ Software Listed

Price tag icon for best price guarantee Best Price Guaranteed

Expert consultation icon Free Expert Consultation

Happy customer icon representing 2 million+ customers 2M+ Happy Customers